[tp widget="default/tpw_default.php"]

how to paint house trim

how to paint house trim插图

What is the best paint for exterior house trim?

Choose an oil-based paint. Oil-based paint ($20 to $50 per gallon) has a thicker consistency and longer drying time (as compared with water-based latex or acrylic paint) to ensure that …Pick a paint based on placement. …Opt for semi-gloss. …

How to get a smooth paint finish on trim?

So,in a nutshell,my tips for getting an extra smooth finish on woodwork and trim are:Sand and prime your surface properlyUse a quality paint recommended for interior trimUse a paint conditioner (Floetrol or Penetrol) to minimize brush strokesUse high-quality angled brushes and give the short-handle a try for better control

How to measure your house for paint?

Tips on Measuring for PaintWall Height. Measure from floor to ceiling.Wall perimeter for areas you plan to paint. Measure the length of each wall. …Ceiling width and length. Omit if you do not plan to paint your ceiling.Sloping ceilings (if applicable) Sloping walls form a triangular wall space. …

How to prepare trim for painting?

Prepare the Trim. The best way to paint trim is to begin with a clean surface. Use a damp sponge to remove dirt that has accumulated on trim in most rooms. In kitchens, use a sponge and soapy water to remove grease buildup from the trim. Scuff-sand the surface of the trim. Start with coarse, 80-grit sandpaper and then move to less-coarse 100 …


Before you break open a can of paint, take time to prepare everything. This will make the process of painting the trim much smoother. We recommend designating one room to start with and sticking to it before moving onto another area in the house.

Safety Considerations

If your trim was last painted before 1978, there’s a good chance the paint that was used contains lead. Even if the trim has been painted since, if the home was constructed before 1978, there could be layers of lead paint beneath the surface.


Whether you’re painting the trim around windows or door casings, baseboards, crown molding, or any other trim in your home, the key to a professional finish and seamless process is proper preparation. Follow along with these steps and modify them for your specific trim.

Choosing Your Paint

Many sources have different opinions on which type of paint is best for trim. At one point, only enamel paint was good enough and durable enough to be used on trim, but most painters have stopped using it. These days, the two most popular options are oil-based and latex paint.

When to Call a Professional

In general, there’s no need to call a professional when painting your trim. Most DIY enthusiasts are fully capable of getting the job done with great results.

How to get rid of drips on paint?

Dip an angled brush into the paint, covering no more than ½ inch to 1 inch of the brush. Use the side of the tray to wipe excess paint off the brush, helping to avoid drips while painting. Step 4: Smooth over the series of short brush strokes with one long brush stroke.

How to smooth out rough trim?

If the trim is rough and worn, start by sanding with coarse, 80-grit sandpaper. Then, move to less-coarse sandpaper such as 100- or 120-grit to smooth the surface. Step 3: Fill in holes, dents and cracks with a lightweight spackling compound. (Follow directions on the spackling container for best results.)

How long does it take for primer to dry on wood trim?

Step 1: Apply primer to trim, covering any bare wood and spackled areas. Allow primer to dry for 24 hours. After the drying period, if bare wood or spackle is showing, apply another coat of primer to the trim.

How many strokes for a wide trim?

Repeat if necessary, depending on the width of the trim, to create the appearance of long, smooth strokes. Technique Tip: Wider trim may require three or four long, parallel brush strokes. Thinner trim may only require one or two long, parallel strokes.

How to prevent paint from bleeding through paint?

To prevent paint from bleeding through the tape, try to use one long piece of tape instead of multiple shorter pieces. Taping Tip: Select 3-to-4 inches of painter’s tape and firmly press it to the wall.

How to tape a wall with painter’s tape?

Taping Tip: Select 3-to-4 inches of painter’s tape and firmly press it to the wall. While holding this "starting spot” in place, pull out 6 inches of tape, then firmly secure it to the wall. Repeat until the tape is secured for the length of the trim.

How do I caulk trim?

I recommend using a dripless caulk gun, a wet cloth and a tube of flexible, indoor, white paintable caulk. Cut a very small piece off the tip of the tube of caulk and make sure to cut it at an angle so you can lay the tip of the caulk neatly into the gap as you squeeze out the caulk.

What happens if you paint trim white?

If you are painting your trim white (or really any other color), every hole, gap and crack is going to show after it has been painted. All holes will show as a contrasting black and be horribly noticeable .

What is the most common painting job?

Painting trim is among the most common painting tasks that homeowners undertake, right along with walls and cabinets.

Why paint trim first?

By painting the trim first, you are saving extra prep time later on and creating a surface that will be easier to tape a perfectly straight line on later.

How long does it take to paint a window?

To estimate your entire trim painting project, I typically plan on 1.5 hours per set of window trim, though different size windows and different casings require more or less time with some of the more complicated larger windows requiring 2+ hours.

How long does it take to prep a 15×15 bedroom?

A typical 15×15 bedroom should then take you anywhere between 4-6 hours.

How much time should I spend trimming a house?

Finally, for base trim, I recommend budgeting 1 hour per 25 feet of trim.

When painting a dinged doorframe, should you paint the trim?

Unless you’re touching up a dinged doorframe, trim should always be the last surface of a room to get the new paint treatment. For interior projects, Martins suggests starting with the ceiling, then moving on to the walls and trim. Unless you’re touching up a dinged doorframe, trim should always be the last surface painted, she says; save the trim for last when it comes to exterior painting projects, too.

What does it mean to paint your front door?

Making your front door’s sidelights and transom pop with a coat of paint means investing in a formula that differs from the one on your living room’s crown molding. "For exterior trim, you will need a paint that withstands the elements—one that is durable with outstanding coverage," says Martins.

What are the factors to consider when painting trim?

But when it comes to trim, there are other factors to consider, like durability, coverage, and sheens . Harriette Martins, brand manager of Benjamin Moore, let us in on a few pro secrets about painting trim that will come in handy for your next project and may even make the final look last longer.

Step By Step Guide

These finishing painting tips can pay off with great results. check out how to use the following tips to your advantage.

1.Shine A Light Across the Woodwork and Circle Flaws

Place a portable light bulb (at least sixty watts) so that it shines (rakes) the surface of the wood to notice loose paint, rough edges, and other imperfections within the surface to see what needs to be cluttered. Take a pencil and lightly circle the points that require work. Add these pencils to your research for easy measurement.

3.Clean Out Tight Areas and Fine Out Details

For small and narrow areas, scrape with a 1-1 / 2-inch blade. versatile spatula. Use a pushing motion to move under the paint, working from a section of loose paint to a section where the paint firmly adheres.

4.Feather Out Filled Areas With 320-Grit Sandpaper

Use 320 grit sandpaper on all filled areas to flatten and smooth them. Clean the frosted areas with an old Associate in Nursing brush and vacuum with a brush. Finish by cleaning the wood with a damp material if the water-based paint is damaged or a sticky material if the oil-based paint is damaged.

5.Testing For Lead

If you are involved with lead-based paint, run a dirt clean-up and check for use of a lead paint and dirt test kit.

6.Let Point Dry, Then Cut the Tape Loose for a Perfect Edge

Once the paint is dry, you can’t just remove the tape from the coating. The paint forms a film between the wall and the tape as well, and removing the tape removes any dried paint residue from the wall. then, before feeding the tape, cut it.

7.Roll Paint Along the Edges for Consistent Texture

When it comes to a mural, the corners and square measurements next to the cladding that is painted exclusively with a brush have a significantly different texture than the surrounding paint. To ensure the finished texture is consistent in these areas, lay the door surface and cut the paint, then roll it out immediately before the paint dries.

What is the best product to clean trim before painting?

An excellent product for cleaning interior trim prior to painting is , otherwise known as trisodium phosphate. This is a powerful grease cutter and can harm other unpaintable surfaces. Read the manufactures label carefully.

What to use to cover furniture?

If a lot of scraping and sanding is needed, make sure to cover all furniture with lightweight plastic and the floors with . If your needs are minimal use a drop cloth where you are working. A runner, 3 feet wide, is all you need. Masking paper can be used around the bottom of door frames or anywhere you need some extra protection.

How to remove ruff paint from wood?

Start with 80-grit to cut down the ruff paint edges and level the surface. Follow this initial sanding with 120-grit paper or medium-fine sanding sponges. The deep groves left by the ruff sanding will have to be removed with finer sanding paper.

What kind of sander to use to sand paint?

You have two options when sanding paint, use a power sander or manual sanding. A palm sander is great for wide flat areas but won’t work very well on delicate recessed areas. Use both sand paper and sanding sponges on hard to sand interior wood trim.

How long does it take for wood trim to dry?

Before wood filler can be applied prime the damaged area with a high quality, fast drying, oil based primer. Allow to dry. This can take up to 24 hours depending on brand. The primer will maximize the fillers adhesion.

How to remove loose caulking?

Loose caulking can be removed using the sharp tip of a 5-way or other multipurpose putty knife. Scrape and cut away any caulking that has lost its grip. Paint that is fully adhered can remain. All ruff and raised areas will need to be sanded before proceeding.

What is the first step in painting interior trim?

The first step when painting interior trim is a good cleaning. This applies to paint that is in good condition or areas that might be excessively dirty and greasy. A clean surface will maximize the paints adhesion. Cleaning can be done later if the paint is peeling, cracked or otherwise in need of sanding.

What is a Zibra 2 inch brush?

Zibra 2 Inch Palm Pro Trim Brush: This brush has a great release of paint for smooth finishes.

How to keep paint brush from streaking?

Tip: Slap your paint brush on the side of the paint bucket instead of wiping off the tip. This keeps the brush bristles loaded so paint is being applied to your trim rather than bare bristles streaking across it.

What kind of paint brush should I use for trim?

A quality brush should be used to paint trim. There are several brands of paint brushes that I consider quality brushes, including Purdy, Zibra and Wooster. Overall, you want to make sure you buy a 2 to 2 1/2 inch angled brush for ease of use. I prefer soft bristles as well.

How to dip paint brush?

You never need to dip your brush more than halfway up the bristles as that will overload it too much. Slap off the excess paint and then cut in along the edges and on top/bottom of baseboards. Then, come back and fill in the middle. Hold your brush at an angle, and gently swipe your brush across the surface.

What is the best paint for trim?

Oil based paint is an amazingly durable paint option which is perfect for painting trim. Once painted, your trim will clean up well, be extra durable, and have the smoothest finish.

What to use to repair trim?

Sand repaired portions of your trim with a sanding block.

What paint should I use for baseboards?

I’ve grown very fond of using ceramic enamel paint on trim and baseboards. It comes in a semi-gloss or satin finish and dries to a hard, durable finish. It dries quickly and offers easy clean up. Our painter introduced me to this type of paint two years ago and it’s been my go-to choice of paint for trim since!

Related Post