InstructionsRemove the hardwareUse a cleaner or degreaser to fully clean the surfacesUse a good primer and spray or paint the cabinets with two coatsOnce primer is fully dry,apply two coats of paintMake sure to apply a top coat after the paint is dry. You can apply 1-2 coats.
What is the easiest way to paint kitchen cabinets?
Share:PREP YOUR KITCHEN CABINETS. We sound like a broken record (we know!) when we say this but prep is the most important step of any paint project.TO PRIME OR NOT TO PRIME YOUR KITCHEN CABINETS. Fusion Mineral Paint is a 100% acrylic,water-based paint with a built-in top coat. …CHOOSING THE RIGHT TOOLS FOR PAINTING KITCHEN CABINETS. …More items…
What is the best paint for laminate cabinets?
What Laminate Kitchen Cabinets Colors Would Be Perfect for paint?Hale Navy (Benjamin Moore)Sherwin William Distance.Sherwin William (Indigo Batik).
What paint to use for painting cabinets?
Urethane Alkyd Satin Enamel (Behr)Quality paint at a very low costGreat for use with a roller or paint sprayerUnlimited color optionsAvailable at any Home Depot
How much does it cost to paint wood kitchen cabinets?
The cost to paint kitchen cabinets is the cheapest of all the kitchen cabinet renovation projects—if all you really need is a cabinet face-lift. Expect to pay an average of $809, or between $395 and $1,234 for kitchen cabinet painting.
How Much Does it Cost to Paint Kitchen Cabinets?
Renovating a kitchen is one of the most expensive remodeling projects that you can take on, and replacing the cabinets can account for nearly 40 percent of that cost.
Should I Paint My Cabinets?
Before you head out to the paint store, however, examine your cabinets to see if they can be resuscitated in the first place. Even the highest-quality paint job can’t revive cheap cabinets that have grown frail with age. Thin veneers peel or delaminate, particleboard cabinet bottoms or shelves sag or break, and hanging rails come loose. If these are the issues you’re dealing with, you’d actually be better off replacing your kitchen cabinets.
How to make antique cabinets look aged?
Simply dip the tip of a paintbrush in a color lighter than the cabinets and dab the excess onto a cloth until the brush is almost dry, then lightly graze the surface of the detail trim, corners, and seams.
Why do you paint cabinets on a table?
The strategy for prepping, priming, and painting doors, drawers, and shelves is the same as for the cabinets, except that all the work is done on a table to reduce the chance of drips, runs, and sags.
How wide is a square brush?
Invest in a good, 3- to 4-inch-wide square brush, whose straight ends will make short work of large, flat panels, as well as an angled brush in the 2½- or 3-inch-wide range, which will help you get paint into the corners of doors with molding and can coat door frames in one pass.
How long does it take for a glaze to dry?
The paint will start to form cracks as it dries, a process that takes about an hour.
What to do if paint ends up on dry surface?
As you go along, wipe up any paint that ends up on adjacent dry surfaces to eliminate the chance of lap marks.
Choose the Right Paint
Purchase the appropriate supplies for your type of cabinets: solid wood, laminate or metal.
Prepare to Paint Kitchen Cabinets
Painting cabinets will take several days to complete, so plan accordingly. Always wear the appropriate safety gear and open the windows for ventilation. Also, for best results you should remove the doors and drawers and work on them in an area that’s out of the way, like a garage or basement. Make sure you’ll have proper ventilation there too.
Prime Kitchen Cabinets
Applying primer is an important step in the painting process. Primer provides a suitable surface for the paint to stick to and it covers imperfections.
Paint Kitchen Cabinets
Paint can be applied with a brush and roller (DIY-friendly) or a sprayer (advanced). If you’d like to use a paint sprayer, watch this video for tips on getting the perfect finish.
Refinish Cabinet Hardware
If you’re using your old hardware, you can clean it or refinish it with spray paint for a new look. If your hardware simply needs cleaning, see Refinishing and Cleaning Kitchen Cabinets for instructions. If you want to replace your hardware instead, see our Cabinet Hardware Buying Guide for options.
Finish: Reassemble Kitchen Cabinets
Now that your cabinets are painted, consider adding shelf liners. Some liners are decorative and stick to the surface. Others are padded to help protect the surface.
See How Your Neighbor Did It
Don’t just take our word for it. Hilary of Embellishments, took on this project in her bathroom and the results are impressive. She’ll walk you through her real-life process of painting cabinets.
What is the best top coat or sealer for laminate cabinets or laminate surfaces?
My suggestion is to use a Polycrylic rather than a polyurethane. The polyurethane top coats are known for yellowing over time (especially when applied to white cabinets).I used this product on my other Painting Laminate cabinets part 2 post. The milk paint top coat sealer is very similar to a Polycrylic top coat.
What is the best primer for laminate kitchen cabinets?
My go to primer and the best bonding primer for laminate surfaces is the Zinsser Primer, which covers all surfaces without the need of sanding.
What is milk paint top coat?
The milk paint top coat sealer is very similar to a Polycrylic top coat. A couple things to note for the laminate cabinet makeover; You could get away with 1 coat of primer, 2 coats of paint, and 1 top coat and it will look great.
Can you use polyurethane top coat on white cabinets?
Side note about the top coat. The polyurethane top coats are known for yellowing over time (especially when applied to white cabinets). My suggestion is to use a polycrylic rather than a polyurethane. I used this product on my other Painting Laminate cabinets part 2 post. The milk paint top coat sealer is very similar to a Polycrylic top coat.
Can I paint cabinets with a sprayer?
The best way, in my opinion, to apply paint to cabinets with a good paint sprayer. I used a paint sprayer when I painted the rest of my cabinets. That being said, using the old paint brush and can give you good results too. I used a foam brush to apply the paint to minimize brush strokes and I think it turned out well.
Is it expensive to paint laminate cabinets?
A contractor once told me that it was almost as expensive to PAINT CABINETS as it was to buy inexpensive new cabinets! WHATTTT! Sure enough, I had more than one person confirm this statement so I thought it had to be true. Actually, it can be very expensive to have someone update laminate kitchen cabinets with paint. That’s why I decided to tackle this project myself. Let me show you how to paint laminate kitchen cabinets the right way without sanding.
Can laminate be painted?
I hope this post has been a huge help for those of you wanting to dive into a big project like this. Painting laminate surfaces can be done!
1. Assess the condition of your kitchen cabinets
This is where you look for damages and wear. Any damages need repairing before painting. Damages can show up through the paint and lessen its lifespan.
2. Remove and label the doors and drawer faces
It’s easiest to use a cordless drill or screwdriver. Start with the door, then the hinges, then the handles. You can use a pen or marker to put a number in the hinge hole and the same number on the inside of the cabinet. Label a bag with that number and put hinges, handles, screws, etc into that bag. It makes putting it back together easier.
3. Put down drop cloths
Nobody wants to clean paint off of where it wasn’t supposed to be. Cleaning paint can be a huge pain, especially if it gets on fabric. You can use drop cloths to stop this from happening and make cleaning up quicker and easier.
4. Clean the cabinets
We like to use a mixture of denatured alcohol and Crud Kutter. This removes dirt, oils, and other things that can cause the paint to peel faster.
5. Lightly sand your cabinets
We suggest using medium and fine sanding sponges, then vacuum them clean. Sanding creates a texture for the paint to grab onto. This makes the paint stick better and lasts longer.
6. Prime your kitchen cabinets
We always use a bonding primer. Bonding primers are specially formulated to do two things very well: stick and be stuck to. It does cost more but that’s because it’s engineered to work better.
7. Inspect the primer
This is to see if it needs light sanding. If so, lightly sand it and then clean it to remove any dust.
How to make a strong bond between paint and cabinet?
To create a strong bond between the paint and your cabinet, you’ll need to roughen up the slick laminate with the help of a gritty companion: sand paper. (For better coverage of a large surface area, consider upgrading to a motorized orbital sander. Your upper body will thank you.) Thoroughly scuff the surfaces of the cabinet with 120-grit sandpaper—enough to get a dusting, but not so much that you tear through the paper-thin laminate surface—and clean up any dusty remains with a handheld vacuum and a damp cloth.
What happens if laminate is cracked?
If laminate is cracked, warped, or peeling, that damage can interfere with the bonding of paint to the cabinet. Ensure that the laminate is in good condition by repairing minor laminate damage or re-facing cabinets before applying paint.
Can you use primer on laminate?
Laminate doesn’t play well with all primers and paints, only those specially formulated to adhere to its picky surface. If you opt for a primer, choose a bonding primer tenacious enough to stick to laminate ( view example on Amazon ), and then top it with an oil- or latex-based paint after the primer has cured.
Can you repaint laminate cabinets?
Short of committing to a more costly replacement of outdated kitchen storage, repainting laminate cabinets is an affordable way to turn the eyesore into eye-catching, modern cabinetry. But while you may be well-versed in painting most any old wood furnishings, from side tables to pantry doors, laminate is another beast altogether. Not nearly as porous as its wooden lookalike, this type of surface requires unique preparation, paint, and paint application. Follow these best practices to reinvigorate your laminate cabinetry with a fresh face that lasts!
Can you test bonding before painting?
Apply your paint to a small, inconspicuous area of the cabinet (like the back of one you hardly ever open), let it cure, then inspect the bonding.
How big is a roll of paint for kitchen cabinets?
A common roll size is 35-in.-wide by 140-ft.-long.
What to do if paint is too thick?
If your paint seems too thick and isn’t leveling out after it’s applied, try mixing in a paint conditioner like Floetrol. Read the instructions for the correct proportion of conditioner to paint. Conditioned paint is often easier to apply and dries to a smoother finish.
What to do after cleaning grease off cabinets?
The first paint-prep step after cleaning grease from cabinets is usually filling unwanted holes, dents and dings with spackling or wood filler. After sanding, getting rid of dust and priming the cabinets, it’s a good idea to check everything with a bright light to spot and fill any remaining holes or dents.
How to speed up paint recoating?
Want to speed up the project? Choose a fast-drying primer for the first coat. Read the label for information on recoating time and to make sure the primer is compatible with the paint you’re planning to use.
What is the best primer for oil based paint?
Oil-based paint dries slowly and levels well. This gives you more working time and fewer brush marks. Also, when they’re dry, oil-based primers like Benjamin Moore Fresh Start Enamel Underbody sand easily providing a perfect base for your finish coat.
What pad to use to sand molded profiles?
When you’re sanding a smooth finish to provide a better surface for paint, use a green abrasive pad to sand the molded profiles. Sandpaper doesn’t conform well enough to get into all of the intricate spots.
How big is a roll of paint?
A common roll size is 35-in.-wide by 140-ft.-long. When you’re done in the kitchen, you’ll have plenty of paper left for future painting projects after you find the best paint for kitchen cabinets.
What is thermofoil cabinet?
In actuality, thermofoil is a complex name for a common type of laminate cabinet. Typically, these cabinets feature an MDF (medium-density fiberboard) core with a thin sheet of vinyl laminate covering the exterior.
How to remove drawers and doors when painting?
Remove all doors and drawers and place in a designated workspace. Use painter’s tripods to elevate the doors from the workspace when painting. Remove all hardware from cabinets, doors, and drawers, and organize in plastic bags. If your cabinets feature removable shelves, it is wise to remove them, as well.
What is a good idea to set up a table or bench with a drop cloth?
Doors and drawers are much easier to work with on a designated work area, so it is a good idea to set up a table or bench with a drop cloth and a means of elevating the doors and drawers, such as painter’s tripods. Lastly, choose your paint.
What finish should I use for latex paint?
It is finally time to paint. Coat all surfaces with high-quality latex paint in either a satin or semi-gloss finish. These two sheens strike the balance between durability and shine and are perfect for this application. As with the primer, use a brush to coat small areas and switch to a mini roller for larger areas.
What materials are used to paint kitchen cabinets?
Because kitchen cabinets come in a variety of materials, it is wise to familiarize yourself with yours before starting. Common materials include wood, laminate, and thermofoil, and the process of painting can differ slightly between materials.
How to keep a paintbrush from fading?
To ensure a paintbrush lasts for years to come, thoroughly wash and dry it between uses. Latex paints require only soap and water, while oil or shellac-based products may require paint thinner or ammonia. Wear proper safety equipment when working with these chemicals.
Can you use oil based primer on latex paint?
If the existing finish is oil-based or you suspect it could be, use an oil-based primer to ensure the latex paint will adhere. Shellac-based primers are another great option for creating a strong, durable bond on a variety of surfaces. Repeat the priming process on the doors and drawer fronts, but refrain from painting the sides of the drawers to prevent an improper fit when reinstalling.