First,use a paint brush to 鈥渃ut in鈥?2- to 3-inch bands around the edges,corners and frames of a room.When cutting in,you can try to do the entire room at one time. However,your border areas will probably dry before you overlap them. …Fit a roller cover onto your paint roller.Pour the primer paint into a paint tray.Dip your roller into the paint,making sure it鈥檚 completely covered. Pass the paint roller over the ridged area of the paint tray a few times to remove excess paint.Start painting the primer in 3- by 3-foot sections. With a fully loaded paint roller,work top to bottom,rolling back and forth across the wall in a series of …Roll in one section at a time,moving from top to bottom and from one side of the wall to the other.
People also ask
How do you paint a room step by step?
How to Paint a Room Start with the edges and corners. Use a good paint brush and use the angle of the brush to help cut in. For the edges near the ceiling, I like to use a stepladder and a HANDy Cup. Be sure to dust your window and door trim before painting. Once the paint is dry, it鈥檚 time to use the roller.
What is the best order to paint an entire room?
My preferred order for painting an entire room is: My reasoning is that I like the get the harder jobs done first. The ceiling is the hardest. It also is the messiest, so I like to paint ceiling first to avoid splattering paint all over my freshly painted walls. Then I like to paint the trim.
How to prepare your home for a professional paint job?
Preparing your space is essential to getting flawless results and begins with cleaning your room. Follow the steps in our 鈥榟ow to paint a room professionally鈥?section to ensure your home is well prepared. In addition, remember to keep safety in mind. Make sure the room has adequate ventilation and you wear appropriate safety equipment.
How do you use painter’s tape to paint a room?
The next step in painting a room is to use painter’s tape to mask off your moldings, windows and doors. Always press the painter’s tape down flat and even to prevent bleed-through. For non-textured surfaces, mask it off where it meets the edge of the wall.