[tp widget="default/tpw_default.php"]

how to paint a desk with laminate

how to paint a desk with laminate插图

HOW TO PAINT LAMINATE FURNITUREStep #1: Clean the Furniture Clean the surface of the piece you are painting thoroughly using a wet rag to ensure there is no dirt or debris on the furniture.Step #2: Sand the Laminate Sand the piece using 220-grit sandpaper in sweeping motions up and down the entire surface area. …Step #3: Prime the Furniture …Step #4: Paint the Furniture …

How to paint over a laminate furniture desk?

Steps:First,apply the primer with the roller in larger areas,then use the brush to fill in shallow-sloped areas. …Let the primer dry completely before sanding it with a fine grit sand paper. …Let the primer dry completely again. …Scrape away any remaining sand that may remain,and apply a layer if necessary.

How to refinish a laminate desk?

Stuff you’ll need:An old deskA sheet of High Pressure Laminate (HPL — Formica,etc.). Look for laminate products that are meant for countertops,etc. …Contact cement. Definitely recommend getting a low-VOC product.Mineral spirits or similar for cleaning surfacesEdge banding. …Disposable glovesMultiple dowels or similar clean strips of temporary support material

How to paint laminate with oak trim cabinets?

Take the cabinets off the hinges and remove all hardware.Sand the entire cabinet surface with 150-grit sandpaper.Prime the laminate and oak surfaces with an acrylic oil-based primer.Scuff the cabinets with fine 220-grit sandpaper.Paint the cabinets with water-based latex paint.

How to distress painted laminate furniture?

Waxing DecorativelyRub the entire furniture piece down with candle wax; an actual unlit candle will suffice. The wax makes it easier to remove additional paint layers.Pour some latex paint in a paint tray,such as an antique white shade,then paint over the waxy furniture using a paintbrush.Rub another layer of wax over the new dry coat of paint. …More items…

How long does it take for Annie Sloan chalk paint to dry?

It took me about 2-3 coats of Annie Sloan’s French Linen on this piece of furniture. Allow your furniture to dry, generally 30 minutes to an hour for Annie Sloan chalk paint is the dry time. Try not to apply paint to thick and this will help speed up dry time.

How do I paint a desk?

To BEGIN, make sure your surface is clean and fill in any dents or scratches with wood putty. Once surface is nice and clean you can start to paint your piece! I like to start from the bottom up or in this case I started on the inside of the desk. This is a great way to do a “test spot” on an inconspicuous spot to make sure you like the paint! Once you like it keep going! It took me about 2-3 coats of Annie Sloan’s French Linen on this piece of furniture.

Can you paint laminate furniture with chalk paint?

When you have your piece of laminate furniture painted in your favorite chalk style paint and sealed you can paint your hardware! I painted the hardware in this pic with Annie Sloans Graphite and I did a wash of French Linen over the Graphite. ?? (A wash is lightly dipping the bristles of your paint brush into your paint color and then into a small amount of water and feathering the paint over the hardware.)

What does affiliate link mean?

Affiliate disclosure: “This post contains affiliate links, which means I receive a small commission, at no extra cost to you, if you make a purchase using this link.”

Where did wood lamination originate?

The process of wood lamination has ancient origins. Traces of laminated wood have been found by archaeologists in the tombs of the pharaohs. The Chinese shaved wood and glued it together more than a thousand years ago. Wood lamination continued to evolve as technology refined the process for ever-changing laminate application.” – ehow.com. …

What is laminate furniture made of?

Often called “fake wood,” laminate furniture is made of a synthetic material, usually plastic, that is used to create a thin exterior layer on furniture or other surfaces. Unlike natural, solid wood, laminate is created by layering and bonding different materials together.

How to sand a piece of wood?

Sand the piece using 220-grit sandpaper in sweeping motions up and down the entire surface area. Vacuum the debris and wipe with a microfiber towel.

How to paint a flipped piece of furniture?

Place smaller pieces legs up on a workbench or other elevated surface. Remove any hardware, if possible, before you start painting. Cover the bench or surface and the surrounding floor. Work in a downward motion on a flipped piece (meaning legs first).

What is cabinet coat?

For surfaces requiring an ultra-smooth, long-lasting finish, Cabinet Coat gives kitchen and bathroom cabinets, shelving, furniture, trim and crown molding an instant refresh.

Can you paint laminate furniture?

Can you paint laminate? Yes—and it’s actually quite simple. Follow our step-by-step guide on how to paint laminate furniture, including project-specific tips for painting laminate cabinets, desks, coffee tables, bookshelves and dressers.

Can Benjamin Moore paint laminated furniture?

From a vintage piece to a brand new purchase, Benjamin Mo ore® products can help you spruce up any laminated piece to bring a fresh new look to your space. You can also easily paint other types of indoor furniture to freshen things up in your home.

Can you paint a dirty surface?

Don’t paint a dirty surface—make sure you clean first.

Can you Paint Laminate Furniture Without Sanding It?

The best overall winners for the scratch test was the BIN shellac based primer and the clear shellac primer, both with and without sanding.

What primer should I use for laminate furniture?

Last but not least I brushed on the BIN shellac based primer . This one is usually a top recommendation when you’re painting laminate furniture.

How long does chalk paint take to dry on laminate?

Paint a little bit of chalk paint on the flat surface of your laminate (so it’s super easy to remove if it doesn’t stick). Let it dry for 24 hours and then try to scratch it off with your fingernail. If it sticks really well, then you’re good to paint the rest of your laminate furniture with chalk paint.

What is the best way to clean furniture?

Clean your furniture with Krud Kutter or a Degreaser.

What grit sandpaper should I use for laminate?

To really test sanding laminate vs without sanding laminate, I sanded half of the laminate top with my favorite 3M 220 grit sandpaper.

How long does it take to paint a bin?

The BIN shellac primer can be painted in 45 minutes.

Can you use chalk paint on laminate?

NO! It definitely sticks better than latex paint does, but please don’t use chalk paint on slick laminate without doing something to make it stick better. If you don’t at least prime under the chalk paint, you’ll be left with a bad paint job, where the paint will easily scratch off of the laminate.

How to make laminate look dull?

Sand in circular motions until the surface of the furniture looks dull and less glossy. Don’t sand too much or you might tear up the laminate from the surface.

How long does primer dry?

Let the primer dry for at least four hours. After four hours, gently touch the primed surface with the tip of your finger to see if it’s fully dried. If the primer is still wet, let it finish drying.

What kind of primer should I use for paint?

I would recommend using a high-quality latex or shellac primer, which will seal the surface and create a nice base for the paint.

How many testimonials does wikihow have?

wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 18 testimonials and 92% of readers who voted found it helpful, earning it our reader-approved status.

How to sand a primed wood table?

Sand the primed surface with a 220-grit sandpaper. Lightly sand in circular motions like you did the first time you sanded the furniture. Wipe off any dust from the surface with a damp cloth.

Why is my paint grainy?

One of the main causes of grainy paint is not wiping off all the dust off of your project before painting or re-painting it.

How to fill in dents in furniture?

Fill in dents in the furniture with a wood filler. You can find wood filler at your local hardware store. Let the filler dry per the instructions on the label.

How to paint a laminate desk to transform it from trash to treasure and give it some farmhouse charm in this DIY desk makeover

I’d been scouring Craigslist for a desk for my son’s room for a while. Nothing had been the right size, shape and especially the right price because, as usual, I didn’t want to spend a ton of money. It pays to keep checking back because one day I finally saw one that checked all of the boxes and it happened to be FREE. I called dibs!

Steps for this laminate DIY desk makeover

Here she is, very beat up, stickers on it, handles broken off and all…

3. Paint

Once the primer was thoroughly dry, I painted the first coat of red paint. Don’t worry, it won’t be that bright. I have a plan.

What is Laminate?

Laminate is a type of hard, protective material that can be made to imitate wood in appearance. Laminate is a less expensive, but inferior alternative to other materials such as wood.

Is laminated wood good for desks?

Laminated wood is an excellent material for desks because it’s stain and scratch resistant. It also provides a sleek, modern look to the office or home work station. These kind of desks are a popular choice for office furniture because they have antibacterial properties and come in an attractive, modern design.

Can you spray paint a laminate desk?

However, you should keep in mind that it’s not recommended to paint a laminate desk if the desk has been stored for years and is dusty or has been used for a long period of time .

What kind of Primer should I use on Laminate?

A laminate desk can be painted, but you must prime it first. The best primer for this is the Zinsser BIN Primer. This product goes on in smooth and thin coats. It dries fast and can be used with most top-coats, including water-based latex paint. Hence, you have a number of options when applying it to laminate desktops.

Why prime laminate desks?

Priming is important with laminate finish to dull its look. If you are looking for a new desk, it’s best to choose one that has been primed before painting.

What are the different types of laminates?

There are either types of laminate: thermofused and high-pressure laminat es.

What type of surface does primer work on?

This primer works well with any type of surface that will have furniture attached later, including wood floors or wood furniture.

How to seal a table top with Minwax?

Use at least 3 coats of Minwax Polycrylic clear satin to seal the top of the table. Using a synthetic paintbrush apply one thin coat and let it dry overnight (patience). Then lightly hand sand with a 320 grit sandpaper. Clean off the surface and add another coat, wait 2 hours and apply the final coat (or more coats if desired).

What paint should I use for a table?

A table that will be used daily needs a paint that is durable and can withstand spills. I recommend BEHR Premium Plus Ultra in an Eggshell enamel finish. (You don’t need an entire gallon, one quart is plenty.) This paint is stain-blocking and is paint & primer in one. For a super bright white, use Ultra Pure White.

How long to wait between coats of paint?

Apply 4 thin coats of paint with a foam roller. Wait 2 hours between coats. Don’t let the first few coats discourage you. They will show the laminate underneath. Be patient, the end result will be a beautiful smooth finish.

How to clean a table top with oil?

The very first thing you need to do is wash the table off. Use a soapy sponge with water to clean all the dirt, oil, or grime off the table top and base. Use a clean dry towel to dry it completely.

How long does it take for a sealer to harden?

Clean off the surface and add another coat, wait 2 hours and apply the final coat (or more coats if desired). Allow the sealer to harden for at least 48 hours. Then start eating at your beautiful new table.

Can you paint a table after 4 coats?

Here is the same table after 4 coats: If you are painting your base , use a paintbrush to paint the legs and other parts of the table that are not easily accessible with the roller.

Do you need to sand a table?

You don’t need to sand too much, just enough to add some “tooth” for the paint to stick to. After sanding, clean the surface again with a soft clean cloth. If the base of your table is in poor condition, go ahead and sand it too. (You might find it easier to hand sand the base of the table.)

How to hang laminate on desk?

Get a bunch of dowels or other clean strips of material and lay them down on the desk top with a foot or so in between. This will allow you to float the laminate directly above the surface to which it is to be adhered. The clean dowels won’t stick to the dried contact cement. Take your time and make sure there’s a good overlap over every edge (that is, the laminate will hang over each edge of the desk when dropped down).

How to cut laminate sheets?

By far the best way to cut laminate sheet is to score the top (plastic) side with a knife several times, then snap it. Use a box cutter with a NEW blade — blades are cheap, ruined laminate is expensive. I’ve heard of people using circular saws, table saws, etc., but you run the risk of tearout and messy edges — the score and snap method is nice and clean.

What do you need to cut laminate on a desk?

This is the fun part. You’ll need a handheld router with an edge trim bit, which comes with a little bearing wheel below the cutter. Set the bit height so that the bearing will roll along the edge of the desk as the cutter trims away the laminate. This is one of the easier things to do with a handheld router, but still work carefully and wear eye, ear, and dust protection.

Which way should a router be viewed?

Note that when viewed from the top down, the router bit will be spinning clockwise. This means that you want to move the router counter-clockwise around the edge of the desk, such that the cutter is always "digging in" to the laminate as opposed to running along it. If you go the wrong way (meaning the bit is rotating in the same direction that you’re moving), the router may jump around and be hard to control.

How to bond laminate wood?

A typical tool for doing this is a 3" j-roller, which looks like a painting roller but has a hard rubber wheel. So for a 3" roller, you want to apply 75 lbs of pressure while rolling across the surface, again starting from the middle and working out. Another way to do this is to get a small clean block of wood, cover it with a light cloth to protect the laminate, and hammer down on the block little by little across the entire surface.

What to do if cement doesn’t work?

In particular check that the corners and edges don’t lift off easily. If they do, apply more pressure. If that still doesn’t work, the cement may have dried past its working time, in which case you can try to re-activate it with medium heat from an iron.

How long does contact cement dry?

Check the instructions on your product, but I let my pieces dry for a good 40 minutes. I used a small roller in a disposable tray for quick and efficient coverage — you can also use a brush, applicator, etc. Wear gloves and make sure you have good cross-ventilation, even for the low-VOC product.

Related Post