[tp widget="default/tpw_default.php"]

how to hang a painting on drywall

how to hang a painting on drywall插图

Hanging a Picture on Drywall and Plaster1 Hang your picture on a stud. For heavier pictures,it is best to hang your picture on a stud. …2 Use traditional picture hangers. While traditional picture hangers may not seem like the most sturdy option,they are easy to use and cause minimal damage to your wall. …3 Use anchor bolts to hang your picture. …4 Provide heavyweight support with a toggle bolt. …

How do you hang pictures on drywall with coat hangers?

Hanging pictures is easy if you know how. Here are some helpful tips for hanging pictures on drywall in your home. Mark the horizontal location of the center of the picture on a piece of masking tape on the wall. Snip off an 8” to 10” piece of wire coat hanger and bend the ends in opposite directions. Hook the wire hanger on the picture wire …

How do you hang a painting on a wall without drilling?

Use a curved hook which you press into the wall and that braces against the inside of the wall. Another good option is to use a stud finder to sink a larger nail, perhaps a 10d or 12d, into a stud rather than only into the drywall or plaster. [7] Depending on the size and weight of the painting, it is often advised to use two hooks or nails.

How do you hang drywall without damaging walls?

To work that fast takes practice and a few specialized tools. But hanging drywall is not just about speed. Doing the job right means using screws of the correct length, off-setting panels so seams don’t line up, and making sure wires and pipes aren’t vulnerable to puncture.

How far apart are studs on drywall?

In most homes or mixed-use buildings, studs find themselves typically spaced 16 inches apart. They can run vertically, horizontally or diagonally. Although most home builders follow these guidelines, it isn’t a guarantee — so your first step in finding a place to hang pictures on drywall is to find the studs.

What is a drywall anchor?

Drywall anchors look like hollow plastic screws. They’re a great ally when working with drywall since they’re designed to lodge directly into it. It’s like a one-way valve. The anchor slides into the wall, then the hook deploys and you can’t pull it back out. The design of drywall anchors ensures that your art remains on your wall. This is especially important if you’re hanging a heavy framed print or painting.

How much does it cost to find studs under drywall?

They let you find studs under the drywall without having to measure. Residential stud finders are fairly inexpensive, with prices ranging between $10 and $50.

What to use for a picture that is heavier than that?

If you have a picture that is heavier than that, use a flat-mounted hook and anchor. Drywall hangers and nails come in a variety of sizes, sold separately and in kits. Grabbing a simple picture hanging kit from your local hardware store is always a good idea too.

How much does a stud finder cost?

Residential stud finders are fairly inexpensive, with prices ranging between $10 and $50. Don’t go buy yourself an industrial deep-scanning stud finder, though — you won’t need all the bells and whistles and a residential stud finder will do fine.

How do you know if there is a stud in drywall?

When you don’t have any other options, you can sometimes tell where a stud is by knocking on the drywall. A dense, muffled knock means there’s a stud behind the section of drywall you’re knocking on, whereas a more hollow sound probably means that there’s no stud behind the drywall.

How to find studs in a wall?

The easiest way to find a stud in your wall is to look for electrical outlets and light switches. Standard electrical outlets and light switches typically attach to studs.

How to hang a painting on a hook?

Attach a d-ring to the painting. These hooks are standard for hanging artwork. Measure the width of the painting and make a mark in the middle of the top on the back . Attach the hanger here. Make sure it is centered so the painting will hang straight.

How to hang a picture in a row?

If you have three or more paintings of the same size or similar size, you can hang them in a straight row. Measure to the same height and pound a nail for each one. Fill the wall space from side to side as much as you can.

How to make a cluster of paintings?

Design a cluster of paintings. Hang five or more paintings of various sizes in an asymmetrical cluster. You might put a large one in the center and arrange the others around it. Or you can make an organic shape with all of the paintings at different heights. Make the cluster look somewhat uniform by putting them all roughly six inches (15 cm) apart.

How heavy of a painting can you hang with wire?

Make a rough judgment about how heavy the painting is as this will determine the strength of wire you need. You can buy wire that will hold up a 100 lb (45 kg) painting.

How long should a nail be for drywall?

As long as your painting is less than about 5 pounds, a regular finish nail will be sufficient to hold it, even in drywall. The nail should be around 1 ½” (3.8 cm). Definitely don’t use a nail that is over 2” (5 cm) because it will end up being too long.

How high should a hanger be for a painting?

For example, if your painting is 36 inches (91 cm), then half of it would be 18 inches (45.7 cm). So the hanger for the painting should be at roughly 78 inches (198 cm).

Why hang small paintings?

Small paintings are great to hang around larger paintings to offset them and create some balance. You can also hang a collection of small paintings in a pattern.

Plan Your Location

This may seem obvious, but you want to plan your location before doing anything else. The location of a stud or what type of anchor you use should always help you place the picture where you actually want it. Planning the location leads to the next step—identifying what resources you have available to you. That includes studs behind the drywall.

Use a Stud Finder to Locate an Anchor Point

Small diameter smooth nails often bend or otherwise work their way to a horizontal or downward position in drywall. This allows a heavy item or picture to slide off or pull the nail out of the wall. That’s no fun. You need something with enough holding strength on its own. That ensures a long-term solution for your heavy picture or artwork.

Consider Using a Drywall Anchor

If you can’t find a stud or the stud is not in a location where you want your picture to hang, you can use a drywall anchor to secure your picture or artwork from the wall. These come in various packages and sizes. We really like using self-drilling plastic drywall anchors along with properly-sized screws.

Combining Drywall Anchors and Studs to Center Heavy Items

Similar to how you mount a television, a good technique for hanging a heavy picture or piece of artwork combines your available anchoring options. Let’s say you have a specific place you want to hang a piece of art. You might locate a stud behind the frame—but not in the center. Now, what do you do?

Final Tips

When hanging a picture or piece of artwork weighing more than 50 pounds, you may want to use a lag bolt. When doing this, I like to also use a washer. This ensures the hanging wire cannot possibly skip over the head of the bolt. The last thing we want is a heavy picture falling off our mount!

How to hang a slack on a wall?

Determine where on your wall you want to hang your object. Make a small pencil mark where you will insert the hook. With press-in wire hooks, the hanger will be approximately 2 centimetres (0.79 in) lower than your hole. Measure the length of the slack if the item you are hanging has a wire on the back of it.

What is a press in wire hook?

Press-in wire hooks are designed to be inserted into drywall without hammers or any other tools. These wire hooks are sometimes known by their brand names, like Monkey hooks or Gorilla hooks.

How to check if a wire hanger is in line?

You can test this by pulling the center of the wire tight toward the top of your object.

How to remove adhesive from hook?

If your hook’s adhesive strip is not already on the back of the hook, peel the liner off 1 side of the strip. Line it up to the back off the hook and press down. Some adhesive hooks come with the adhesive already affixed to the back.

What to do if your item pulls the adhesive hook off the wall?

If your item pulls the adhesive hook off the wall even after you’ve waited, check to make sure you’ve used a hook that is appropriate for the weight of your item.

How much weight can a glue hook hold?

Adhesive hooks come in various sizes and should say how many pounds they will hold. The largest of these hooks hold 8 pounds (3.6 kg) and the smallest are rated for only 1 pound (0.45 kg) of weight .

What is a Molly bolt?

A molly consists of a screw and a sleeve. The sleeve flays out against the backside of drywall to create a wide base of support. You will need a drill to install a molly bolt. Attach the bit that matches the size of your molly bolt.

Why do you need a stud to hang pictures?

Using a stud to anchor whatever hardware you use to hang pictures means they’re more securely attached to the wall. A nail driven into a stud isn’t going anywhere. It also means you can safely hang heavier items without worrying about them falling down, taking a huge chunk of drywall with them.

Why do we need anchors?

Anchors provide a wider balance point than relying on picture wire to drape across a few nails or hooks

Why do you need a hook for a picture?

For this reason, they’ll support slightly heavier objects than using a nail alone. They’ll also make small holes in the wall since you’re still only dealing with nails penetrating the drywall.

How to use nail for wall hanging?

To use nails, mark each spot on your wall where you want to hang something. Hammer in the nail about 3/4 of the way into the wall. Then, hang your item.

What is the best tool to find studs in a wall?

The ideal tool for locating the studs in your walls is a stud finder. Aptly named, this electronic or magnetic device will beep or signal you in some way when it’s placed over a stud. This method is fast and accurate.

How to install an anchor?

Installing an anchor is slightly different than using nails since you’ve got to make the hole before inserting the hardware. Using a drill, create the hole for your anchor and then insert it into the space. Next, drill in the screw, leaving a little space between the two pieces to hang your picture.

What is a toggle bolt?

Toggle bolts look a little like a boat anchor and are used for hanging items around 50 pounds. It’s like a winged anchor only it tightens up to the backside of the wall to hold heavy items in place. It’s also made of metal rather than plastic. Self-drilling anchors look more like a thick, plastic screw.

What is blueboard in Massachusetts?

Massachusetts contractor Paul Landry often installs “blueboard,” so-called because of its indigo paper. It bonds tenaciously with veneer plaster, a finish much in demand in Landry’s area. The light-gray product known as drywall is the type in widest use.

How many screws do you drive in a panel?

As the assistant holds the panel, drive five screws, evenly spaced, in a line across the panel’s width and into the joist or strapping closest to the middle of the panel.

How much does a 12 ft drywall panel weigh?

Bigger panels have their downside, however: They’re heavy and unwieldy. A 12-foot sheet of ½-inch drywall weighs about 80 pounds, nearly 30 pounds more than a standard 8-foot panel. That’s why manufacturers have developed 3?8-inch thick gypsum panels that weighs 16 percent less than standard sheets.

Why does Landry’s stud bow into the room?

On exterior walls, it’s unusual to find a stud that bows into the room, because the sheathing holds it in place. When Landry does, his only choice is to power-plane the edge of the stud back into alignment. 8. Finishing touches.

What happens if a ceiling panel doesn’t span the entire ceiling?

If the panel doesn’t span the entire ceiling, its end must land on the center of a strapping piece or joist. If it doesn’t, measure to the center of the farthest support piece the panel will overlap. Transfer that measurement to the edge of the first panel and mark it.

How far away from the box do you drive screws?

Cover the box with another panel, and attach it as in Step 3; do not drive screws any closer to the box than 24 inches.

How to score a paper panel?

Hook a T-square on the panel and place it alongside the mark. Score through the paper on the front with a utility knife, using the T-square as a guide. Stand the panel on edge and snap the waste part of it away from the score line. Cut through the paper backing to remove the waste.

How much does a picture hanger weigh?

In the case where your studs aren’t where you want your picture to be, screw a traditional picture hanger into the drywall to hang pictures that weigh 25 pounds or less. For pictures that weigh up to 50 pounds, you can use 2 hangers spaced evenly along the back of the picture.

How much weight can a picture hanger hold?

Picture hangers with one nail can hold up to 25lbs, and hangers with two nails can hold up to 50lbs. While it is not recommended that you push the limits of these hangers, you may use them for medium load paintings. You can use them on plaster as long as the hangers have screws or anchor screws.

What is the best bolt to use for plaster walls?

Provide heavyweight support with a toggle bolt. Toggle bolts hold the greatest amount of weight. They are spring-loaded and provide support from the back of the wall. They are also the best choice for plaster walls. They require a much wider drill bit to install.

How many times has wikihow been viewed?

To create this article, 9 people, some anonymous, worked to edit and improve it over time. This article has been viewed 342,377 times.

How does wikihow mark an article as reader approved?

wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, several readers have written to tell us that this article was helpful to them, earning it our reader-approved status.

How heavy is too heavy to hang on a wall?

Pictures that weigh over 20 lbs. (9.1 kg) are considered too heavy for hanging on a wall without proper reinforcement. To ensure that your picture doesn’t come crashing down after you hang it, make sure you choose the proper tools and technique for a heavier picture.

How many references are there in wikiHow?

To create this article, 9 people, some anonymous, worked to edit and improve it over time. There are 8 references cited in this article, which can be found at the bottom of the page.

Related Post